Showing posts with label About Ian. Show all posts
Showing posts with label About Ian. Show all posts

Friday, January 13, 2012

The Origin Story: How SCD Started


I've been a builder since about 1970, mostly working in small partnerships and coop building outfits located in Cambridge, Mass, and in Central Vermont. We always had as shop of some sort, and always did quite a bit of kitchen work.

In the early 80's, I wrote a kitchen book called “The Motion-Minded Kitchen”. I spent a lot of time in the Boston Public Library researching the history of the kitchen. My favorite discovery was the work of Frank and Lillian Gilbreth. In the 1920s they developed something called Motion Study, which was a very powerful way of looking at any kind of work setting. After his death, Lillian applied these ideas to the home, and specifically to kitchen design and the work we do in our kitchens.

Most of the basic ideas of kitchen design concepts we use today go back to Motion Study, including the fundamental ideas of work centers, food flow, “storage at point of first use”, and “one-motion storage”. In the early '50s, a huge research project at Cornell, known as the Cornell Kitchen Study, took this work further. These ur-texts are the basis of good kitchen design, and also of ergonomic design and accessible design.

When I was about 60, I was ready to stop being a working carpenter and General Contractor. I wasn't that good up on the ladder any more, and there were younger people who were much stronger. Also, being a GC is very stressful. I think the term 24/7 was originally a term to describe the GC's workday.
I decided it might be interesting to build a new business from scratch, a small shop building kitchens based on what I had learned over the years, including all the concepts I learned back in the Boston Public Library.

It would be fun to use these ideas in the design of kitchens, but I'd been doing that already. What was really exciting was the idea of applying the same concepts to the design and operation of the shop itself. It's always great fun to set up a shop, and I've done it many times. But it might be really thrilling to design a shop from scratch, exactly laid out and equipped for this one primary purpose. And so it proved to be.

A kitchen functions a lot like a woodshop. In one case, say, you are taking a one-pound slab of salmon from the fridge, cutting it to size, spicing it up, making a drizzle for it, cooking it just so, placing it artfully on a nice looking plate, and serving it. You want to move your piece of salmon about and through your kitchen in the best and most convenient way. In the woodshop, you are taking a forty pound slab of plywood, cutting it to size, and so on - you get the idea. You want to do it in the best and most convenient way. The storage, cutting, spicing, and finishing, and plating problems are much the same, but the stuff is heavier. You still have to put the work centers in the right order, store things in the perfect place, work at a comfortable height, and clean up afterwords.

What would it be like to design a shop perfectly suited to building kitchens, and at the same time, refine our design to make it better, more flexible, and easier to build? Maybe through such efficiencies, we could make our work a bit more affordable, and maybe even make a little extra income for ourselves. Wouldn't that be fun.

Around this time I encountered another set of ideas that was just as important and interesting as “Motion Study.” That was the idea of Lean Engineering, also known as The Toyota Manufacturing System. The most well-known idea from Lean Engineering is that of “just-in-time delivery”. That means you don't inventory a lot of parts or supplies, you make your suppliers bring them just as you need them. Similarly, you don't inventory the things you make and then wait for someone to buy them. When you have an order, you make it up, and send it out the door, almost in one continuous motion. This saves space, but it also saves an enormous amount of work, specifically the work involved in handling your building materials at the beginning of the project, and storing and handling your product after building it.

Another “Lean” concept that is particularly relevant to the woodworker (particularly one without huge funds or huge ambitions) is to design your shop to be very adaptable. Instead of huge, expensive machines that do one operation efficiently, you have a lot of small machines that can do a variety of things, that you can move around as needed, based on the work in hand. Another key idea is “one piece flow”. Rather than, for example, making all the dovetails for all the drawers for all the cabinets, then set them aside to assemble later, you might instead make and install a single set of drawers completely. Saves work minimizes moving stuff around the shop endlessly. Most important, you catch errors early, and can adjust as needed. It leads you closer to “error free” building. Like my Toyota truck.

So, seven years ago, armed with these two powerful and (frankly) inspirational sets of ideas, we built a small but wonderful shop, all on one floor, with a nice loading dock almost exactly the height of the bed of my truck, with a few big table saws and lots of small tools that are always set up to do the many tasks that go into building our cabinets. We have a fleet of rolling carts to help us move stuff, various vacuums to suck the dust and fumes away. The paint store is two minutes away, the lumber yard ten.

Building this, and setting up this little business had been mostly fun and always interesting. My personal hope is that as I get older, the good design invested in the shop will make it possible for me to work as long and as much as I want, with less physical strain, good light, and good safety.

Another reason I wanted to start this business was to work with Ian Maas. I met Ian when I was working and teaching at Goddard College. We worked together on projects there, and later at Iron Bridge Woodworkers. It's been fun collaborating with him for the past seven years, applying the ideas above, and slowly improving our ways of working and the kitchens we are building.

Tuesday, November 29, 2011

About Ian Maas, Kitchen Designer

I love food and all of the things that make up this most basic of human needs. Saving seeds; cultivating and improving soils; planting and growing; marketing; harvest and storage. I love to read about the history of foods, where they came from, who grew and improved them and why. I love to be driving down a back road and find  a tidy, reasonably scaled farm, settled into the landscape around it and you can just see the pride that can go into producing that most basic of human needs. And of course I love preparing and eating food!
 I grew up around up animals and large gardens on a small hippy homestead in Ohio. My parents were suburban escapees trying to get back in touch with what it takes to produce your own food. This stuck with me and I continued with it studying agriculture in school and for six years working on several small vegetable and dairy farms in Central Vermont.

To this day I do the same thing with my family that my parents worked towards and produce a lot of our own meat and vegetables on our own five acres of heaven in Central Vermont.

I came to kitchen design through this background. Actually it was total happenstance. I knew Sam Clark as a carpenter around the area and worked with him on some building projects. About eight years ago he asked me if I would like to work with him. He was putting together a shop and restarting his kitchen business and was looking for someone to work with. I had no shop experience at the time and when I mentioned this he said "perfect".

 Now eight years on and sixty or seventy kitchens later I have grown into the work and started understanding what goes into a great kitchen. How that space can be laid out to create a place that is a joy to work and socialize in. I bring to my ideas the kitchen of  a farmer, a family man, and most importantly a foodie! Meals made from scratch with potatoes dusty from the root cellar; nearly frozen brussle sprouts brought to the counter still muddy and snowy; and a roast spending a day in the oven warming the house. Large gatherings of friends and family, all in the kitchen crowding around the counters and surfaces, drinking, laughing, and comparing pot luck dishes. A day of canning and freezing with every burner going and every surface covered with jars and pans and spilled tomato juice. A foodies kitchen!

I decided to start this writing project to begin to categorize what I have learned working with Sam Clark about  kitchens and kitchen design. I will try to lay it out by category with comment, pictures and places for you the reader to join and help make this blog a clearing house of ideas for the kitchen loving foodies out there of all budgets. The categories will be, but not limited to, design and layout, drawers and doors, woods, counter materials, appliances, hardware types, finishes, flooring, sinks, shelving and budgeting.

Thanks for logging on helping us to reignite the hearth into our modern lives.